There may be exceptions, however, to this general rule. To communicate via the data logger's RS-232 port, the PDA's serial cable can be plugged in directly to the data logger's RS-232 port (or a standard serial cable can be used if extended cable length is required). If this is the case, for communication via the CS I/O port, you will most likely use an SC32B (purchased separately) in place of the PDA-to-CSI/O connector that ships with the software. Some PDAs act like a DTE device (data terminal equipment) and the 9-pin cable terminates in a male connection.

PConnectCE ships with connectors and cables that assume the PDA acts as a DCE device (data communications equipment), with the 9-pin cable terminating in a female connection. Communicate at baud rates of 38,400 bps (CR800, CR850, CR1000, CR23X, CR3000) and 9,600 bps (all other data loggers).Communicate using a direct serial connection, RF401-series Spread Spectrum Radio, or Bluetooth.Display Final Storage data in tabular or comma-separated format.Transfer data logger programs between the data logger and handheld.Set data logger flags, ports, and clock.Measurements are updated every two seconds.

Display real-time data logger measurements.

Create unique station files for each data logger.

This process also synchronizes program files between the handheld and the PC.įunctions supported by PConnectCE includes the capability to: Collected data are transferred to the PC during the ActiveSync® process. PConnectCE can be used to collect data from the data logger, and transfer the data to an office PC.

Pocket pc phone